UA-89934965-1

Vista Mini

Availability:
In Stock
Product Code:
Mini
295.00
Ex Tax: 245.83€

Not yet rated Write a review
The Vista Mini is a simple yet effective metal detector aimed for the beginner to the hobby, also designed to perform very well in the field without the headaches of confusing settings that detectors can bring.

Really is the most simplest detector in our range and on the planet, the Vista Mini also comes with preset discrimination and due to running a lower kHz than the Mini Max it's also very stable too.

Running at 7.6 kHz the Mini has good all round performance when detecting for many different sized objects, this also makes the machine ideal for finding very desirable items like hammered coinage and other great treasures, all will be open to the beginners in the hobby using this detector if the ground has them buried and within the Mini's parameters.

You can also be assured that the Vista Mini has good recovery speed that helps when trying to find artefacts around iron what is very important on busy fields.

The Vista Mini works solely on a single audio tone, this allows you to easily learn the detector fast, you will also hear the differences between shallow small items and larger deeper items through the audio tone alone after time.

When targets are located you can use the all-metal mode to help check and identify unwanted metals like large iron (ferrous) items that many machines can struggle with.
Smaller iron is taken care of silently with the preset discrimination channel that the Mini utilises brilliantly.

DeepTech designed the Mini to be easy to use for any level of Detectorist in the hobby, with only the two control dials and a single toggle switch you can't really get things wrong what in return can make for good detecting sessions.

Volume, sensitivity also one toggle switch are the only controls on the Mini, the toggle switch is multi functional and allows for Disc mode and All-Metal Mode also ground balance.
All-Metal mode is great for archeological work when all metals are to be detected and recovered from the ground. 

Ground balancing is very easy to do on the Mini and once you've found a clean patch of ground free from all metallic objects you then just hold down the toggle switch then raise and lower the coil about one to seven inches off the ground, once the detector falls silent in audio the ground balance is complete then just switch to disc mode and start to detect.

Once you mastered the simplistic controls you can start to detect in the field within 5-10 seconds or less with the Mini once you're familiar with it.

Well recommended detector for the novice and easy day advance Detectorist.


Operating Frequency

8,6 kHz

Detector type

motion

Sensitivity control

Yes

Volume control

Yes

Auto Ground Balance

Yes

Modes of operation

§  DISC. Mode

§  All Metal Mode

Searchcoil Type

2D

Searchcoil Size

11”

Cable Length (approx.)

55” (140 cm)

Audio Frequency (approx.)

780 Hz

Weight (with batteries )

(approx.)1320g.

Battery Requirements

We strongly recommend to use 8 x 1,5 V AA Alkaline Batteries or rechargeable Batteries with more than 2000mA/h

Battery Life (typical)

20-25 hours

LED low battery alert

Yes

Optimal Temperature Range

10-40 C

Optimum Humidity

0 to 75% R.H.

Share

Write a review