This is the slightly upgraded version of the original Vista Smart what is a firm favourite of many DeepTech fans.
With this + version you now get the option to either adjust the iron volume to a level that you desire or completely silent the Iron (ferrous), so when detecting on busy ground and the iron is in abundance then you can lower the iron volume so you can hear the good signals easier.
With the controls everything is within quick reach as with all Vista machines, it will only take you seconds once in the field to setup and detect with.
On the faceplate we have the usual style layout what consists of sensitivity, ground balance and discrimination, but we also have a pinpoint button that can be pressed to perfectly find out where the target is under the coil once located.
On the underneath of the control box we have two toggle switches, these are your boost feature switch and your discrimination options, all metal, two tone.
All-Metal mode is great for archeological work when all metals are to be detected and recovered from the ground.
If you wish only to hear good targets (non ferrous) items only then you can do this just with a flick of the toggle switch underneath the control box.
With the Vista Smart you'll be able to find small and large items with ease, it really has built up a great reputation for its high performance what is always reassuring when when choosing a metal detector.
The sum up is - fast and deep with great all round performance that will benefit you in many field situations
15,5 kHz +/- 50Hz
Iron Volume – two functions in one knob:Iron Volume+Silent discrimination
Manual Ground Balance
Modes of operation
2 Tone Mode (low tone for ferrous objects and high tone for non-ferrous objects)
All Metal Mode
Cable Length (approx.)
51” ( 129 cm )
Audio Frequency (approx.)
Weight (with batteries )
Power Consumption (Without sound, Booster OFF)
Power Consumption (Without sound, Booster ON)
Power Consumption (Without sound, Booster OFF, Iron Volume on max.)
Power Consumption (Without sound, Booster ON, Iron Volume on max.)
We strongly recommend to use 8 x 1,5 V AA Alkaline Batteries or rechargeable Batteries with more than 2000mA/h
Battery Life (typical)
LED Low Battery alert
Operation Temperature Range
0 to 75% R.H.